Features:

1. Light weight design, which ensure not tired after long time operation

2. Slim design at Handle part, which is useful for children and student, easy to    handle

3. Speed adjustable. Easy to control the drawing speed

4. Heating ring and nozzle is the integrated cartridge design 

5. Temperature adjustable

6. Intelligent standby function. Enter standby in 5 minutes if without any          operation

Design highlights:

1, the product lightweight design . 
2 , holding a slim design of the site . 
3 , stepless design . For some of the design and operation of three-dimensional defects pen on the market , we         believe , must be to urgent since when as a three-dimensional pen , allowing users to operate when arbitrary. 
4 , heating coil and a nozzle cartridge design .

Specification: 

Output material type: Fused deposition modeling

Molding method: 3D modeling

Printing area: Unlimited

Sprinkle speed: Adjustable

Power input: 12V 3A

Nozzle diameter: 0.4-0.7 mm

Opteration Guide: 

1. Put the power adaptor AC plug into the outlet and insert the DC plug into the "power input" hole, the yellow LED turn on and the pen is started and standby. 

2. Press the "wire feeding" button, the red LED turn on and the pen is under preheating. After 0.5-2 minutes later, the red LED turn to blue, preheating finished the pen is ready to use. 

3. Insert the consumptable material into the "wire loading hole" which is at the end of the pen, the other hand keep on pressing the "wire feeding" button, the material will be loaded by built-in motor. Wait there is plastic liquid come out from the nib nozzel, the material loading is sycceed. 

4. Painting. ( The speed controller can adjust the spray amount according the moving speed, no need to use both hands)

5. Do not touch the nozzel and heating parts during the drawing for your fasty. 

6. The device will swith to standby model if stop using over 5 minutes. The "working LED" will turn off, when use again, need press the "wire feeding" button to restart. 

7. When need to unload or change the material, please repeat the step 2 and keep on pressing on "wire unloading" button. 

"*": Heating time affected by the setting tempreature and environmental tempreature. 

"**": The material ending must cut to smooth before loading the material. 

"***": Unloading the material after each use is highly recommended. 

Advantages: 

Comparing to other 3D pen in the market, you can find that ours is the only one who use ceramic nozzle, which is suitable for kids, and also it is the only one who has function adjusting temperature and speed, which will be compatible for different material. And the design of housing is very comfortable for holding. 

Use ceramic nozzle, which is suitable for kids, and also it is the only one who has function adjusting temperature and speed, which will be compatible for different material. And the design of housing is very comfortable for holding. 

Temperature, our adjustable range is 160-230.Other 3D pen can not be adjusted, they have no adjustment fuction. And  they have two steps, one is "-", the other one is "+". We tested it, we found that the adjustment function cannot work. 

Warning! ! ! 

1. This device is suitable for children over 8 years old and adult use, Children should use it under

The tutelage of adult. 

2. The painting pen nib and the near area are dangerous high temperature area, the highest temperature can reach 230, do not touch the nib with hands or touch others objects with the nib. 

3. Do not block the wire loading hole with foreign body. 

4. Do not use non-official power adaptor from other company. 

5. Do not use non-ooficial consumable material from other company. 

6. This device is precision electronic instrument, no water sprinkling. 

7. Keep ar safty place after using to prevent from high falling or children touching.