Item specifics:

Place of Origin: China (Mainland),GuangdongNet Weight: 0.4kg/PCSSpinning Speed: AdjustableTrademark: MYRIWELBrand Name: MYRIWELModel Number: RP100BModel: RP100BHS Code: 851770300Use: Promotional PenPrint Range: UnlimitedPacking: Standard Export CartonCertificate: CE,FCC,ROHSOrigin: Guangzhou, GuangdongTrade Terms: FOB, CFR, CIF, DAT, FAS, DDP, DAP, CIP, CPT, FCA.

Use:Promotional Pen

Product Description:

Delivery time:

Most of the iteam shipping in 7 working days.

Specifications and parameters:

Discharging mode: Hot melt extrusion molding

Molding: Three-dimensional molding

Print range: Unlimited

Spinning speed: Adjustable

Temperature: 60 - 230 adjustable

Working voltage: 12V 3A equipment

The nozzle diameter: 0.4mm

Product function diagram: 

Import and export

The power indicator light

Work indicating lamp

Temperature adjustment holes

Speed control switch

The power input hole

Wire back button

Wire button

Integrated nozzle heating head

Operating instructions:

1 the power adapter AC power line into the mains socket, the other end of the DC plug into the drawing pen is only "power input hole". The Yellow LED lights, shows that the equipment has power to enter the standby servo state. 

2. The LCD screen display words "" or "", choose "material selection, material selection. " from the LCD screen. The selection must be same as the material attribute consistent, in order to avoid failure

3 click "wire" button, the red LED lights, shows that the equipment has entered the warm-up state. About 0.5-2 minutes later. When the red LED lights from red to blue. Show end of preheating, equipment can work normally. 

4 the consumable insert the pen end only "supplies introduction hole", brought received long press "wire" button, random supplies of conveying equipment from the built-in motor. When the nozzle end with the compound NIB out shall be reproduced successfully. * *

5. The 4 creation. (this equipment with stepless speed regulating function, in the creation process, according to the pen speed to adjust the amount of glue. Without both hands. )

6. Homogeneous materials have different melting points because of the different colors. Please according to the silking to timely tune temperature. (the material melting point judgement and temperature adjustment Please refer to " temperature tuning")

7. The use of the process it is forbidden to touch the head and the heating component. 

8. When the device is not more than 5 minutes, will automatically enter standby state of sleep. This "light" out. If you need to use, click "wire" button to trigger. 

9 need to back wire or replacement supplies, please repeat (2), and then press "wire back button". 

"*": Heating time by setting temperature and the influence of environmental temperature

"* *": The installation of consumables money must take supplies some use a knife to cut

"* * *": After each use to uninstall back wire

Temperature tuning:

Due to the different melting points of different color supplies, in order to improve the quality of the greatest creation, please pay attention to the following questions: 

1. Low speed working, if hear the nozzle end "crackling" sound, that means the temperature is too high, use "material selection / tempering "keys to turn the temperature down, the adjustment range is 8-15 

2. Normal use, if encounter lots of bubbles, showed that the temperature is high, use "material selection / tempering "keys to turn the temperature down, the adjustment range is 3-8 

3. Normal discharge should be smooth without bubbles. (occasionally bubbles)

When the extrusion surface color dim and dark, motor sound obvious difficulty, that temperature is low, use "material selection / tempering "keys to turn the temperature up, the adjustment range is 3-5.